Instruction Sheet

Steelite


hr

View Steelite Detail

TO INSTALL

1. Insert VERTICAL main frame (both sides).
2. Insert HORIZONTAL main frame (both top & bottom into door cut out.
3. Bed glass in putty or mastic.
4. Insert vertical bead (square ends) into channel in main frame.
5. Insert horizontal bead (mitred ends) into channel in main frame (tap with rubber mallet) both top and bottom.

NOTE: To remove door lite from door, reverse the above installation instructions.

VISION PANELS FOR ¾ HOUR FIRE DOOR:
· Maximum 1296 square inches, (exposed area), with no dimension exceeding 54 inches.
· Minimum dimensions to edges - 6 inches.
· Use listed ¼ inch wired glass only.

VISION PANELS FOR 1-1/2 HOUR FIRE DOOR:
· Maximum 100 square inches of exposed glass area.
· Minimum dimensions to edges - 6 inches.
· Use listed ¼ inch wired glass only.


NOTE: A 1/16 inch asbestos setting block must be used at bottom of glass for all ratings.

· Lite kits are listed for use on hollow metal fire doors only, with a minimum kin face of 20 guage.
· Multiple lites are permitted. The minimum rail between each lite MUST NOT be less than 6 inches.

Steelite

     GLASS SIZE                                DOOR CUT-OUT

 (inches)                                 (inches)

HORIZONTALS

SHGS-6                                 6                                                        6-3/8

SHGS-10                             10                                                      10-3/8

SHGS-18                             18                                                      18-3/8

SHGS-20                             20                                                      20-3/8

SHGS-22                             22                                                      22-3/8

SHGS-24                             24                                                      24-3/8

SHGS-30                             30                                                      30-3/8

SHGS-36                             36                                                      36-3/8

SH-3                                4-1/4                                                        4-5/8

SH-514                            6-1/2                                                        6-7/8

SH-10                            11-1/4                                                      11-5/8

SH-1714                        18-1/2                                                      18-7/8

SH-1914                        20-1/2                                                      20-7/8

SH-2114                        22-1/2                                                      22-7/8

SH-2314                        24-1/2                                                      24-7/8

SH2514                         26-1/2                                                      26-7/8

SH-2714                        28-1/2                                                      28-7/8

SH-2914                        30-1/2                                                      30-7/8

SH-3114                        32-1/2                                                      32-7/8

SH-3314                        34-1/2                                                      34-7/8

 

VERTICALS

SVGS-10                             10                                                      10-3/8

SVGS-20                             20                                                      20-3/8

SVGS-24                             24                                                      24-3/8

SVGS-30                             30                                                      30-3/8

SVGS-32                             32                                                      32-3/8

SVGS-34                             34                                                      34-3/8

SVGS-36                             36                                                      36-3/8

SVGS-48                             48                                                      48-3/8

SVGS-54                             54                                                      54-3/8

SVGS-65                             65                                                      65-3/8

SVGS-69                             69                                                      69-3/8

SV-10                            11-1/4                                                      11-5/8

SV-19                            20-1/4                                                      20-5/8

SV-2314                        24-1/2                                                      24-7/8

SV-2914                        30-1/2                                                      30-7/8

SV-3114                        32-1/2                                                      32-7/8

SV-3314                        34-1/2                                                      34-7/8

SV-3514                        36-1/2                                                      36-7/8

SV-5314                        54-1/2                                                      54-7/8

SV-6334                              65                                                      65-3/8

SV-6534                              67                                                      67-3/8

SV-6734                              69                                                      69-3/8