Steel Door Louvers - SDL-FP

Adjustable "Z" Blades with fire-actuated closure mechanism


hr

louverRecommended for applications were positive fire separation is required.

All units equipped with 135(strange symbol) fusible ink; tested for compliance and listed by the Underwriters Laboratories, Inc. for use in 1 ½ hour rated doors.

Louver Blades of 16 gauge cold rolled steel pivot cadmium-plated steel rivets.

SDL-FP louvers are supplied in a medium bronze backed silicone polyester powder. Other finishes available on request.

Maximum listed size: 24" x 24"

Free Area: 45%

  1. Louver Sizes indicated below is the Door Cut-Out Size.
  2. Minimum Louver Size is 10" X 8"
  3. Non-Standard Sizes Available Upon Request. Please contact Customer Service for Pricing and more Information.
  4. Non-Standard Finishes (shown below) Available Upon Request. Please contact Customer Service for Pricing and more Information.
    1. Mineral Bronze Powder Coat (Standard)
    2. Grey Prime Coat
    3. AMS Beige
    4. Red
    5. Sand
    6. SC Beige
    7. White
    8. Silver
    9. Black/Flat Black
    10. Gray Hammerstone
    11. Brass
  5. Non-Standard Door Thicknesses Available Upon Request. Please contact Customer Service for Pricing and more Information.
Stock Sizes
SDL-FP 12 x 12" sdl-fp.jpg
SDL-FP 18 x 12"
SDL-FP 18 x 18"
SDL-FP 20 x 12"
SDL-FP 24 x 12"
SDL-FP 24 x 18"
SDL-FP 24 x 24"
For Door Cut Out use above sizes
(width is the first dimension listed).

Intertek

UL