|
|
 |
 |
|
home /
Sliding Door Track / C-412
|
|
|
|
|
| C-412 | |
|
 C411 Instructions
|
|
|
|
"Spinwheel" Quick-Release hanger for Single & Bi-Parting, Bi-Passing,Pocket or Face and Mounted Doors.
An essential safety feature for Nursing Homes and Hospitals. The "Spinwheel Hanger" permits fast and easy door removal, from the outside, regardless of door blockage (eg. When a patient in distress in a washroom requires immediate assistance). Leveling and height adjustment can be accomplished by one person during door installation without tools. Minimum clearance of ½" is required between door and fascia to permit disengagement.
Extruded Aluminum Track, 6060T5 Alloy weiging 0.388 lbs. Per foot.
Load Capacity 150 lbs. (2 hangers)
|
|
 |
|
|
C-412 Kits and Parts: |
|
Complete set of C-411 Hangers (2) for 1 door.
C/w screws & 1 set C-1203 guides
|
| Pre-cut Track Length | | #of Doors |
| 48" | | 1 |
| 64" | | 1 |
| 72" | | 1 |
| 84" | | 1 |
| 96" | | 1 |
| 120" | | 1 |
Series 412 track by the foot, Individual C-412 Hangers, Ball Bearing Wheel |
|
|
|
|
 | | Spin the wheel for adjustment then simply lift the door up and out for easy removal. |
|
|
Optional Hardware |
|
 | | C-200 Series recuessed In-Floor or In-door guides, are available as standard,m or spring loaded for uneven floor conditions. |
|
 | | C-1200 Series Nylon center, Side or Side and Centre combinations, or a self-adjusting assembly simply ensure quiet, rigid operation. |
Note:these are recommendations only, K.N.Crowder will provide track and hardware to you exact specifications and requirements. |
|
|
C412 detail w/
optional C413 fascia:
View Larger Image |
|
 |
|
|
|