Door Locks & Pulls
COLOUR CHART
DOOR LOCK AND PULLS
C-30 PRIVACY DOOR
LOCK AND PULL
Dimensions:
2-1/2" [57.2mm] Wide x 2-3/4" [69.9mm] High x 1-3/8" [34.9mm] or 1-3/4" [44.5mm] depth.
NOTE: Must specify door hickness when ordering.
C-35 ROUND DOOR
LOCK AND PULL
Dimensions:
2-3/8" [60.3mm] back set, 2-1/8" [54mm] hole diameter required. Will work with 1-3/8" [34.9mm] or 1-3/4" [44.5mm] doors.
C-23 & C-25
WOOD DOOR PULLS
C-23 for1-3/8" [34.9mm] thick doors.
![]()
C-25 for 1-3/4" [44.5mm] thick doors.![]()
Dimensions:
2" [50.8mm] Wide x 4" [101.6mm] high x door thickness.
![]()
C-40 PASSAGE PULL
Dimensions:
2-1/2" [57.2mm] Wide x 2-3/4" [69.9mm] High x 1-3/8" [34.9mm] or 1-3/4" [44.5mm] depth.
NOTE: Must specify door thickness when ordering.
C-75 & C-70
FLUSH PULLS
Dimensions:
2" [50.8mm] Wide x 4-1/8" [104.8mm] High x 1/2" [12.7mm] Depth
C-80 SERIES DOOR LOCKS & PULLS
C-80B FLUSH PULL

C-80ET TRIM SET

C-80ET trim set features spring loaded flush pulls which appear flush on the side of the door when not being used. Simply push the top square in and pull your door. When finished let go and the pop-out square will spring back into the flush position. The C-80ET Trim set is only available with the C-80L or C-82L door locks.
![]()
C-80L DOOR LOCK AND PULL


C-80S DOOR STRIKE WITH PULL


![]()
C-81 EDGE PULL


C-82L DOOR LOCK


C-90 SERIES HEAVY DUTY DOOR LOCKS & PULLS
C-90 SERIES FLUSH PULLS
|
![]() |
|||
C-90B - Blank Flush Pull |
C-90C - Flush Pull with Cylinder hole supplied with Cylinder: 1" [25.4mm] Diameter hole x 1" [25.4mm] depth. 5-PIN Schlage “C” Key way |
C-90E - Flush pull with Emergency Turn Screw |
C-90T - Flush Pull with Thumb Turn |
|
![]()
![]()
C-90S DOOR STRIKE WITH PULL
![]() |
![]() |
To be used with C-90L door lock and pull for Bi-parting doors
![]()
C-91 DOOR EDGE PULL
![]() |
![]() |
To be used with C-90L door lock and pull for Bi-parting doors
![]()
C-92L DOOR LOCK
|
C-92L-HL HANDICAP DOOR LOCK
This combination uses our C-92L Door lock in junction with C-90HL Handle lever and Emergency Coin Turn on the opposite side. For more details visit our website. |
COMBINATION CHART
STANDARD FLUSH PULLS are for 1-3/4" [44.5mm] doors. For doors that are 1-3/8" [34.9mm] please specify 138 after the product number. (eg. 








