Sliding Door Track Single Track Systems C-810 Sliding Door Track

CCGH-Glass Hanger

CC-902 Side Mount Bracket & CC-904 Top Mount Track [Medium to Heavy-Duty]

Catch´N´Close

CCGH Glass Hanger Spec Sheet Catalogue Page PDFDownload CAD Details

Patented in Canada and USAK.N. Crowder's Catch'N'Close® system is a Patented product in Canada & the U.S.
Catch'N'Close® is a registered trademark of K.N. Crowder Mfg. Inc. in Canada & the U.S.
[Main Image]

For Single & Bi-Parting Wall Mounted Doors

Using the popular design from the standard CGH Glass Hangers, our well-known precision ball bearing nylon tire wheels, and adding Catch´N´Close technology, results in the ultimate sliding glass door system! The CCGH hangers are maded for 3/8" [10 mm] or 1/2" [12mm] glass. Hardware is concealed by our unique snap-on covers which can be supplied in different finishes. The snap-on covers allow for minimum clearance between the bottom of the track to the top of the hanger to be 1/8" [3.2 mm]. Using the new CC-904 Track, combined with the CC-902 Side Mount Bracket & CC-902 Fascia can result in significant savings by eliminating the need for constructing a bulkhead to hide the track & hardware.

  • CCGH-038 Hanger for 3/8” [10 mm] thick glass
  • CCGH-012 Hanger for 1/2” [12 mm] thick glass
  • Load Capacity up to 300 lbs. (two Hangers)
  • Use with Extruded Aluminum CC-904 Track, 6061T6 Alloy
  • Use with Extruded Aluminum CC-902 Bracket, 6061T6 Alloy
  • Use with CC-2 Catch´N´Close closing device for up to 200lbs. doors
  • Use with CC-3 Catch´N´Close closing device for up to 300lbs. doors

Operation Video
[image]
150,000 Cycle Tests 150,000 Cycle Tests Weight Image

TYPICAL LIST OF PRODUCTS REQUIRED FOR A STANDARD GLASS DOOR USING THE Catch´N´Close TECHNOLOGY:

[image]

OPTIONAL PRODUCTS

[image]
CC-920 Snap-On Fascia
[image]

CC-921 End Cap Only
(For use with CC-904 Track & CC-902 Bracket combination only)
[image]
CC-922 End Cap only
(For use with CC-904 Track, CC-902 Bracket & CC-920 Fascia combination only)
[image]

CCGH-038Cor012C Continous Glass Catch´N´Close Hangers are available for doors up to 96” [2438 mm] wide and up to 300lbs each.


CcGH HANGER WITH Cc-904 TRACK DETAIL

[image]

CC-902 Side Mount Bracket illustrated as solid blue profile. Supplied in continuous lengths.
* Indicates mounting locations to the wall support on CC-902 Side Mount Bracket.
Optional CC-920 Snap-On Fascia illustrated as solid black profile.

Patented in Canada and USAK.N. Crowder's Catch'N'Close® system is a Patented product in Canada & the U.S.
Catch'N'Close® is a registered trademark of K.N. Crowder Mfg. Inc. in Canada & the U.S.